Before you install Nucleus Kernel BKF - Corrupted Backup Repair Software on the Host Computer, it's very important for you to complete the following items on the following checklist:
First of all make sure you have enough memory on the Host Computer for Nucleus Kernel BKF - Corrupted Backup Repair Software . The application requires only about two megabytes of space, but we recommend as much as 56mb of free RAM (depending on how much data and how large a drive is being recovered).
Make sure you have enough free space on your Good Device. You need more space to save the repaired files . Here's a complete list of everything that may need to be saved to the Good Device before and during a recovery session:
Nucleus Kernel BKF - Corrupted Backup Repair Software application
During a recovery session, Nucleus Kernel BKF - Corrupted Backup Repair Software creates temporary working files on the Good Device. These files could take up dozens of megabytes of space, depending on the size of the device and amount of lost data found.
If you want to save just a small amount of data, you can use a floppy disk as the destination drive; otherwise, you need to use a local or network drive. If you don't have enough free space, you may switch to a Host Computer or Good Device with more free space.
Close all other applications to improve performance during installation. Although not necessary, this is highly recommended.
Introduction 